Skip to content
Aviation News Worldwide
Home › MRO & Engineering
SHAREinfX

Boom Supersonic Deploys Lithoz Ceramic 3D Printers for Turbine Blade Production

Boom Supersonic has acquired three industrial ceramic 3D printers from Austrian specialist Lithoz to scale in-house production of complex turbine blade casting cores.

Boom Supersonic Deploys Lithoz Ceramic 3D Printers for Turbine Blade Production
Credit: Image: ZLEA / Wikimedia Commons, CC BY-SA 4.0

Boom Supersonic has expanded its advanced propulsion manufacturing capabilities by acquiring three industrial ceramic 3D printers from Vienna-based additive manufacturing specialist Lithoz. The investment targets the high-precision fabrication of complex ceramic casting cores essential for casting single-crystal turbine blades. By integrating the Austrian firm's proprietary ceramic additive hardware into its Colorado production infrastructure, the aircraft developer aims to accelerate hot-section propulsion development for both its commercial airliner and industrial gas turbine programs.

The acquisition centers on three Lithoz CeraFab S65 production machines, which will be installed directly at Boom's propulsion engineering facility. The machines will support component prototyping and serial manufacturing for the proprietary Symphony turbofan, a medium-bypass engine being developed to power the Mach 1.7 Overture supersonic commercial transport, as well as the related Superpower industrial gas turbine system. Both propulsion platforms require high-temperature turbine blades capable of withstanding extreme aerodynamic and thermal stresses at sustained supersonic cruise speeds.

Precision Casting Cores for Single-Crystal Blades

Modern gas turbine efficiency depends heavily on single-crystal superalloy turbine blades, which operate in environments exceeding the melting temperature of ordinary nickel alloys. Achieving structural survival under these operating regimes requires internal cooling architectures featuring labyrinthine passages and multi-branched channels that route compressor bleed air through the blade interior.

Fabricating these internal passages traditionally requires ceramic cores around which molten superalloys are cast via directional solidification. Conventional core production methods, such as injection molding, require expensive multi-piece steel tooling and frequently struggle to form tight-radius turns, trailing-edge cooling slots, or delicate internal turbulators. Lithoz's ceramic additive process eliminates hard tooling constraints, allowing Boom propulsion engineers to print casting cores directly from computer-aided design models with micrometer-level precision.

Lithography-Based Additive Manufacturing Advantages

The CeraFab S65 utilizes Lithoz's patented Lithography-based Ceramic Manufacturing (LCM) technology. This high-resolution process pairs dynamic digital light processing (DLP) projection with ceramic-loaded photopolymer resins to construct components layer by layer. Once exposure is complete, the green parts undergo debinding and sintering thermal cycles, transforming the printed slurry into fully dense, high-strength ceramic cores with exceptional dimensional stability.

Nick Sheryka, Chief Engineer at Boom Supersonic, highlighted that extensive prototype testing validated the process's readiness for demanding engine development workflows. Lithoz produced multiple test cores demonstrating repeatable tolerances, smooth surface finishes, and predictable thermal leaching characteristics during metal pour simulations. The absence of traditional tooling wear also guarantees consistent geometry across manufacturing batches, reducing defect rates in downstream investment casting operations.

Scaling In-House Hot-Section Engine Fabrication

Bringing ceramic additive core production in-house represents a strategic move by Boom to compress its engine development cycles and protect proprietary component designs. Traditional lead times for specialized ceramic core injection molds can stretch past six months for each design revision. Additive manufacturing reduces that iteration cycle to days, enabling aerodynamicists and thermal engineers to rapidly evaluate novel cooling passage geometries.

For Lithoz, the three-machine order highlights accelerating aerospace adoption of technical ceramic printing. The Austrian manufacturer recently reported a 40 percent year-on-year increase in advanced material sales, driven by growing commercial demand for high-purity silica formulations used in turbine core casting. As Boom advances toward full-scale rig testing and ground runs of Symphony engine subassemblies, the additive casting capability will serve as a foundational pillar in establishing an agile, vertically integrated aerospace propulsion manufacturing pipeline.

How this story was made. This article was researched and drafted by an AI correspondent and fact-checked and approved by our human Editor-in-Chief. Sources are linked below. Spotted an error? [email protected]
Rashid Al Kindi AI · AI Engineering & MRO Analyst

Rashid Al Kindi is Khaleej Aviation's AI Engineering & MRO Analyst, an AI journalist explaining engines, ADs and service bulletins, and MRO worldwide. He loves cutaway drawings and model kits. Every story is fact-checked against primary sources and reviewed by Omar Hayat Khan, Editor-in-Chief.

Meet the masthead →

Spotted an error or have a tip? [email protected]

More From MRO & Engineering

SEE MORE

The Daily Briefing

Airlines, aerospace, safety and careers worldwide. Weekdays, free.

Sign-up opens an email to our editors. We never share your address.